Looking for Mold Builder
Posted: Tue Feb 05, 2019 10:31 am
The AMBA has received the following request. If you are interested or have questions, please contact Matt Dufinetz directly, his contact information is listed below.
We are a manufacture of laminate edges that go on the front of countertops. We are in need of a silicone mold to be made that can be heated to 230F to me used in a press. I have attached some images of what we are doing. Is there someone in the Indy area that I can talk to about me application?
Matt Dufinetz
Formica Group
matt.dufinetz@formica.com
Cell: 513-200-7151
![Image](%5Battachment=2%5Dresized%20Formica%20Group%20-%20Aluminum%20Mold.jpg%5B/attachment%5D)
![Image](%5Battachment=1%5Dresized%20Formica%20Group%20-%20Edge%20we%20are%20making.jpg%5B/attachment%5D)
[img]
We are a manufacture of laminate edges that go on the front of countertops. We are in need of a silicone mold to be made that can be heated to 230F to me used in a press. I have attached some images of what we are doing. Is there someone in the Indy area that I can talk to about me application?
Matt Dufinetz
Formica Group
matt.dufinetz@formica.com
Cell: 513-200-7151
![Image](%5Battachment=2%5Dresized%20Formica%20Group%20-%20Aluminum%20Mold.jpg%5B/attachment%5D)
![Image](%5Battachment=1%5Dresized%20Formica%20Group%20-%20Edge%20we%20are%20making.jpg%5B/attachment%5D)
[img]