Pics for sticking part
-
bakera@byrne-tool.com
- Posts: 6
- Joined: Mon Jan 07, 2019 3:06 pm
Pics for sticking part
See attached
- Attachments
-
- 2600-2.JPG (57.89 KiB) Viewed 27753 times
-
- 2600-1.JPG (68.63 KiB) Viewed 27753 times
-
- 2600-4.JPG (41.21 KiB) Viewed 27753 times
-
jtmcphee@mold-craft.com
- Posts: 2
- Joined: Mon Nov 26, 2018 3:57 pm
Re: Pics for sticking part
TPU generally likes to release from a textured surface. Generally draw polish to B-1 then bead blast with a #240 oxide to a D-2 finish.
Other things to review would be burrs in the mold, processing parameters & purging the barrel and drying the material...I think it is picky with moisture.
Good Luck.
Other things to review would be burrs in the mold, processing parameters & purging the barrel and drying the material...I think it is picky with moisture.
Good Luck.