Page 1 of 1
Large Core Needed
Posted: Mon Jan 07, 2019 3:55 pm
by bakera@byrne-tool.com
Anyone interested in quoting this core or know someone that could make it? We are looking for 1 core in Uddeholm Royalloy Stainless. And it is getting hot!
Thank You
Andrew K Baker AMBA-MMBC
B Y R N E T O O L + D E S I G N | Strategic Account Manager
direct 616.825.4006 | office 616.866.4479 ext.1106 | cell 616.240.3770 | fax 616.866.4575 |
www.Byrne-Tool.com
Re: Large Core Needed
Posted: Tue Jan 08, 2019 10:00 am
by ljpatten
Hi Andy.
It's possible but there is an issue with the translation. It came in at .160 diameter at the base.
Larry Patten
larryp@dramcotool.com
Re: Large Core Needed
Posted: Tue Jan 08, 2019 10:32 am
by todd@hs-mold.biz
Hi Andy,
i am interested in quoting that part for you. send me info to my email on quantity and maybe some more info on what is important. Just need to know what needs to be ground or just turned and heat treat if any.
Dan Schirle
H & S Mold Inc.
dan@hs-mold.biz
Re: Large Core Needed
Posted: Tue Jan 08, 2019 12:08 pm
by tkmoldeng
Hi Andy,
Unfortunately we cannot handle this project at this time. I appreciate you posting this on the site!! This forum is great for this type of situation. Best of luck!! It looks like some of the other AMBA Members may be able to help.
Best,
Tom Barr
TK Mold & Engineering, Inc.
Re: Large Core Needed
Posted: Wed Jan 09, 2019 2:15 pm
by bakera@byrne-tool.com
Thanks everyone. We have a few quotes and are able to move forward soon and deliver on time. We appreciate the help.
Andrew K Baker AMBA-MMBC
B Y R N E T O O L + D E S I G N | Strategic Account Manager
direct 616.825.4006 | office 616.866.4479 ext.1106 | cell 616.240.3770 | fax 616.866.4575 |
www.Byrne-Tool.com