Pics for sticking part

Post Reply
bakera@byrne-tool.com
Posts: 4
Joined: Mon Jan 07, 2019 3:06 pm

Pics for sticking part

Post by bakera@byrne-tool.com » Fri Jun 21, 2019 8:15 am

See attached
Attachments
2600-2.JPG
2600-2.JPG (57.89 KiB) Viewed 71 times
2600-1.JPG
2600-1.JPG (68.63 KiB) Viewed 71 times
2600-4.JPG
2600-4.JPG (41.21 KiB) Viewed 71 times

jtmcphee@mold-craft.com
Posts: 1
Joined: Mon Nov 26, 2018 3:57 pm

Re: Pics for sticking part

Post by jtmcphee@mold-craft.com » Fri Jun 21, 2019 11:40 am

TPU generally likes to release from a textured surface. Generally draw polish to B-1 then bead blast with a #240 oxide to a D-2 finish.

Other things to review would be burrs in the mold, processing parameters & purging the barrel and drying the material...I think it is picky with moisture.

Good Luck.

Post Reply